Hot dip galvanized serrated flat bar steel grating with twisted square rod for stairs and treads

Short Description:

Product Detail

Product Tags

Specifications of Steel Bar Grating :

1.The shape of bearing bar: Plain type (may be omitted in the symbol of steel grating), Serrated type and I-Shape type

2.Bearing bar pitches can be 12.5, 15, 20, 30, 30.16, 32.5, 34.3, 40, 60mm, of which 30mm & 40mmare recommended.
3.Cross bar pitches can be 38, 50, 60,100mm, of which 50mm & 100mm are recommended.
4.Surface treatment: Hot-dip galvanizing, paint or other anti-corrosive coatings are available, of which hot-dip galvanizing is generally recommended.

Material: Q235 in line with GB/T700 steel 
Application: flooring, catwalk, mezzanines/decking, stair tread, fencing, ramp, dock, trench cover, drainage pit cover, maintenance platform, pedestrian/crowded pedestrian, factory, workshop, motor rooms, trolley channel, heavy loading area, boiler equipment and heavy equipment area, etc 
Tolerance :
The allowed deviation of length is +0/-5mm, while the allowed deviation of width is +/-5 mm. 
The non-perpendicularity of bearing bar is allowed no more than 10% of width of bearing bar. 
Cross bar surface should not surpass bearing bar surface 1mm, beginning & end of cross bar should not surpass the end surfaces of two sides of grating 2mm. 


Steel grating standard Steel standard Galvanizing standard
China standard YB/T 4001.1-2007 GB700-88 GB/T13912-2002
USA standard ANSI/NAAMM(MBG531) ASTM(A36) ASTM(A123)
U.K. standard BS4592 BS4360(43A) BS729
Australia standard AS1657 AS3679 AS1650


Manufacturing process of steel grating:
Material-welding-cutting-end plate welding-surface treatment-final shipment









  • Previous:
  • Next:

  • Related Products